|
Shenzhen Honghua Technology Co.
|
AC220V 50Hz Ingress Protection Test Equipment
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
IEC60529 Drip Box IPX1 IPX2 Waterproof Test Equipment</
IEC60529 Drip Box IPX1 IPX2 Waterproof Test Equipment
Product information:
This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX1 and IPX2.
The rise and fall of the drip box is controlled by the motor. It is equipped with the rotatable objective table whose rotating speed is 1r/min for IPX1 testIt is also equipped with 15°bevel for supporting sample for the IPX2 test. What’s more, this device is with the clean water filtration unit which can prevent pinhole from jamming.
Technical parameters:
|
No. |
Item |
Parameter |
|
1 |
Power supply |
Single phase AC220V,50Hz |
|
2 |
Water supply |
Water flow rate10L/min±5% clean water without inclusion. |
|
3 |
Water tank size |
L*W*H=1100×800×350mm |
|
4 |
Drop test area |
L*W*H=1000×600mm,customizable |
|
5 |
Drop height |
200mm1650mm adjustable |
|
6 |
Dripping speed (water flow) |
1+0.05 0mm/min or 3+0.05 0mm/min (Switchable) |
|
7 |
Water hole |
Φ0.4mm |
|
8 |
Distance between holes |
20mm |
|
9 |
Diameter of rotary table |
Φ600mm |
|
10 |
Rotating speed of the rotary table |
1r/min |
|
11 |
Load bearing of the rotary table |
≤150electrical equipment (without rotary column) |
|
12 |
15°bevel for supporting sample |
15°bevel |
|
13 |
Site requirements |
Dedicated IP waterproof test room,The ground should be flat with illumination |
|
Shenzhen Honghua Technology Co. [China (Mainland)]
Business Type:Manufacturer |
